Category: electrically conductive

Designed specifically for small volume fluid or liquid dispensing applications, the eco-PEN XS 180 doses highly precise quantities of various materials in the nanolitre and microlitre ranges. The eco-PEN XS 180 is suitable for both line and dot dispensing, with bead widths starting from >0.1 mm, and an adjustable dispensing rate to suit the run […]

An interesting exercise: go to Google Patents and search for the term “Thinky”. The results demonstrate the enormous range of original technology breakthroughs which have depended on the ability of Thinky mixers to mix challenging liquids, pastes and powders in nanotechnology, batteries, electronics, pharmaceuticals, and many more. Can we help you with your R&D?

We are witnessing the widespread adoption of contactless cards for payments, rather than the hitherto main applications of access control and ID. The key to the reliability and longevity of these dual interface smart cards is the effectiveness of the electrical connection between contact chip and RFID antenna. One solution is Polytec PT’s PU 1000, […]

You can buy two (or more) part adhesives which have been pre-measured into the correct proportions, mixed and degassed, filled into a dispensing syringe or cartridge, and then frozen to stop the cure. The adhesive is shipped from the factory to you in an insulated box also containing ice. Upon delivery, you store the adhesive […]

Polytec PU 1000 is a single part adhesive which cures quickly at room temperature to a flexible, electrically conductive polymer. It can replace traditional epoxies which are typically rigid and require high temperature cure, giving production efficiencies and enabling new applications where pliability and conductivity is important. Polytec PU 1000 addresses applications in die attach, bonding of […]

The preeflow® eco-DUO600 offers precision metering and mixing of two component materials with mixing ratios adjustable up to 5:1. It is designed for use with two component materials such as silver loaded conductive epoxies, silicones or polyurethanes which may be dispensed in small quantities for either dots or beads. We see applications in microelectronics, medical optics, […]

We see many requirements for an electrically conductive bond formed with an adhesive. They vary from the micro (flip chips onto pcb’s, die-attach) to macro (wires onto sensors), and the range of projects is substantial. Often, our customers would like to use the adhesive in place of solder. The reasons include temperature restrictions, geometry, process […]

Polytec EC 275 extends our portfolio of specialist high performance conductive epoxies and adhesives. Polytec EC 275 has innovative specialist fillers which deliver excellent electrical conductivity (1×10-3 – 7.5×10-4 ohm-cm) within a low cost, two component formulation for applications in electronics, micro-electronics, opto-electronics, hybrids and sensor technology. Electrically conductive adhesives are widely used in the electronics […]

Polytec PU 1000 is an electrically conductive, polyurethane adhesive which addresses applications in die attach, bonding of components in hybrid circuit applications and surface mount technology (SMT); areas where silver filled electrically conductive adhesives have been used for many decades. Usually such adhesives are epoxy-based, and are two-component or premixed and frozen single-component systems – […]