Category: video

A fundamental element of achieving the correct dose of UV light is ensuring the intensity of your UV curing lamp is understood. UV curing intensity as noted on a lamp’s data sheet is typically measured from a particular distance, so if your lamp is not set up to the same distance as the data sheet […]

Our partners at THINKY, makers of planetary centrifugal mixers, have produced a video detailing how to use the THINKY ARV-501 vacuum mixer, with or without the vacuum mixing functionality. In this video, you can see how the user interface works, how to set up a program, and learn about the mixer’s PC interface:   The […]

We’re on a mission to help UK manufacturers squeeze more productivity out of their bonding and materials application processes. While it is not usually difficult to figure out the investment justification on the equipment that we offer, there also isn’t a high upfront cost for improving your dispensing process from a manual one to one […]

The UK’s manufacturing industry needs to be far more productive and therefore competitive than it is today. Solving the productivity puzzle may assume more importance as we emerge from the current pandemic crisis, with the essential task of ramping back up the manufacturing economy looming. In a few weeks, a month or two… we must […]

WACKER SilGel 612 silicone gel potting compound has a cured consistency that is really hard to describe in words, so we have demonstrated it in video format. This soft silicone gel provides excellent shock and vibration absorption in addition to the usual benefits of potting compounds such as component protection from water and other environmental […]

How to degas a syringe using a THINKY mixing and degassing machine is a visual guide to removing air from syringe packaged materials. Suitable for degassing materials from low to high viscosity the THINKY ARE-250 can also uniformly mix your compound, epoxy, adhesive, silicone, paste, powder or other material before being decanted into syringes and degassed ready […]

The latest addition to our YouTube channel features an explanation of just how quick and easy it is to get going with a THINKY mixing and degassing machine.   THINKY Mixers are industrial non-contact “planetary” mixers for all engineering compounds. They mix, disperse and degas your materials in seconds to minutes, in a sealed or lid-less […]

We have added a “how to” video to our YouTube channel. Setting Up a Pressure Pot for Dispensing is a short visual guide for preparing a pressure reservoir for dispensing materials such as adhesives, paints, lacquers, solvents, inks, coatings, oils and many other low to medium viscosity liquids from a pail or bottle. How to set […]

We offer a range of temporary masking resins that provide reliable and cost effective protection for critical surfaces and cavities during finishing operations. Dymax SpeedMasks cure in seconds upon exposure to UV/visible light and replace traditional masking materials such as tapes, lacquers, waxes, boots and caps. SpeedMask resins are easily applied, and are available in […]

QuantX™ – the latest generation of dispensing components, designed and manufactured to compete – and be compatible – with other leading brands. We offer next day delivery and economical purchase price for engineers and buyers. The QuantX range has been developed by our partner Fisnar in response to market demands for a premium, compatible product, […]

Our customer BPR Medical, based in Mansfield, Nottingham, is a perfect example of a small British company which combines expertise, creativity and entrepreneurialism to design, develop and manufacture world-beating products for export worldwide and use in the United Kingdom, for which it was rewarded in 2012 with a Queen’s Award for Enterprise: Innovation. As with […]

Our digital benchtop fluid dispensers handle a wide range of tasks from depositing microdots to lines to small volume potting and filling. The Fisnar DC100 Precision Dispensing Controller & Automatic Liquid Dispenser  provides control in the application of virtually any fluid. Latest features including ample program storage, programmable alarms and I/O integration help to improve […]

This video on our YouTube channel compares and contrasts our most popular Thinky Mixers, using the mixing and defoaming of silicone resin as an example. The manufacturer’s video shows a Thinky ARE-310 – the equivalent machine available in Europe is the Thinky ARE-250, which is functionally the same. Thinky mixers use a combination of rotation […]

Light curing adhesives offer many design and manufacturing benefits spanning a wide range of industrial applications. These adhesives cure in seconds, forming high-strength, environmentally resistant bonds whilst maximising productivity. General and specific formulations are available for bonding plastics, metal, glass and other substrates. These adhesives can be applied by hand, or by semi or fully automated […]

Low cost dispensing robots provide versatility , precision productivity in the automation of dispensing operations. The Fisnar F5200N.1 is a compact and economical gantry robot which enables unlimited work height and provides open access. It can form dots, lines, arcs and circles, and has a capacity of 100 programs, each with up to 4000 points. […]

We offer a small-footprint benchtop robot that enables cost-effective automation of any dispensing operation. The Fisnar F4200N robot features a true three-axis design, and can be interfaced with any of our dispensing equipment. This makes it ideal for form-in-place gaskets, adhesives, coatings, potting, filling and shielding in the lab or on the line. Programming is straightforward, […]

The preeflow eco-PEN dispenses and doses with accuracy and repeatability whilst optimising material usage. It can dose or dispense any liquid, from free-flowing solvents to heavily filled conductive adhesives, in volumes as small as 0.001ml. Its positive displacement pump technology enables precision volumetric fluid control without stress to the material. The eco-PEN is suited to semi […]

Opti-tec 4200 is an optically clear potting compound suitable for encapsulating LEDs and other electronic components. Opti-tec 4200 is a clear polyurethane resin for applications including lighting, illumination or when the electronics needs to be visible. It features excellent non-yellowing colour stability owing to UV resistant base materials and stabilisers. In double syringe or twinpack sachets, the […]

We offer materials and processing equipment to meet the bonding and assembly needs of medical device manufacturers. A range of ISO 10993 and USP Class VI materials are compatible with the substrates commonly used in the industry. The range comprises structural adhesives, coatings, sealants, form-in-place gaskets and temporary masks – all for medical device assembly. And mixing, […]

Intertronics offers a benchtop mixer that mixes, disperses and degasses liquids, pastes and powders without a vacuum. The Thinky ARE-250 features a planetary design that simultaneously revolves and rotates the ingredients being mixed. Materials are mixed in your sealed or lid-less containers such as jars, beakers, syringe barrels or cartridges. Used in critical applications in […]

For applications demanding fast cure bonding we offer a range of LED light curable adhesives. Dymax LED Curing Adhesives are optimised for use with the latest LED lamp curing systems, offering repeatable production proven bonding performance on rigid and flexible substrates, with formulations optimised for the needs of industries from medical devices and electronics to […]

Dymax ECE Series UV curing flood lamps enable rapid curing of UV adhesives, coatings and inks. These lamps provide moderate to high intensity UV/visible light in benchtop systems or integrated into assembly lines. Two sizes are available to meet the many demands of industries from medical devices to automotive assemblies. Electronic shutter systems provide precise […]