The FIS F1300N rotary dispensing table provides an easy and efficient method of dispensing a circular pattern on components. Difficult to access areas are also easily dispensed onto, with the fully adjustable tilting Z-axis enabling controlled rotary dispensing at an angle.
The Z-axis tilt is easily adjusted to dispense either on a vertical/horizontal internal or external wall of a component part. The system is fully programmable to control rotation speed, dispense delay, degree of rotation and wait period before cycling using the intuitive user-friendly HMI display.
The FIS F1300N dispenses adhesives, silicones, grease and lubricants. Dispensing from barrels, cartridges or valves is easily achieved by using the Fisnar modular robot brackets to mount the required dispense equipment onto the Z-Axis of the rotary table.
Features & Benefits
- Accepts components up to 300mm / 12″ diameter
- HMI Control panel for easy set-up and use
- Operator lockout
- 9 programmable memory facility
- Auto-cycle / cycle count limit
- Tool load capability 10kg
- Workload capability 3kg
- Dual push button, foot pedal or remote start cycle initiation
|Cycle Initiation||Manual or Automatic|
|Rotation Speed||0-60 rpm|
|Data Memory||9 programs|
|I/O Signals||2 inputs / 5 outputs|
|Power||AC Input 100-240V 1.4 A, DC Output 24V DC@2.4 Amp|
|Air Input||70-100 psi (5-7 bar)|
|Air Output||1-100 psi (0.1-7 bar)|
|Dimensions (WxDxH)||350 X 433 X 575mm|
|Approvals||CE, RohS, WEEE|
|FISF1300N||Rotary Dispensing Table|
- Last updated: August 2018
- Version: 1.0
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.