VC300 Two-Way Dispensing Valve Controller
About VC300 Two-Way Dispensing Valve Controller
The VC300 digital dispenser is a sophisticated dispensing controller which rapidly actuates pneumatic dispensing valves to deliver more accurate and repeatable dots or beads.
Using a 5/2-way pneumatic solenoid valve, the controller provides a continuous ‘valve off’ state until a signal is received from the in-built manual, timer and cycle functions, or an external source such as a benchtop dispensing robot.
By using positive pressure to close air-actuated dispensing valves, such as the MV-0180LF microshot needle valve or 790HP-LF high pressure valve, materials are dispensed with a higher level of control, preventing material run-on, and allowing faster processing.
An integrated pressure regulator and gauge allows the controller to control both dispense valve actuation and the fluid pressure of the fluid feed system being supplied to the dispense valve, resulting in a simple and compact valve system setup.
Features & Benefits
- Rapid solenoid activation grants faster dispense rates, improving processing speeds.
- Continuous valve off state mitigates material run on
- Simple programming enables a dispense cycle to be created and automatically displayed and stored within minutes
- Three modes of operation: manual, timed and cycle
- Digital timer display and an easy-to-read analogue pressure gauge, to ensure precise and repeatable shot sizes
- User-friendly touch-sensitive controls
- Manufactured with a durable aluminium housing and industry-standard pneumatic system components
- Fluid pressure out port allows direct control of fluid feed systems for simpler setups
|Dimensions (WxDxH)||192 x 128 x 76 mm|
|Operation modes||Manual, timed and cycle|
|Dispense time||0.008 – 999.9 seconds|
|Cycle rate||Up to 600 cycles/min|
|Relative humidity||20 – 90% (no condensation)|
|Air input||100 psi (7 bar) max|
|Air output||1 – 100 psi (0.07 – 7 bar)|
|Input AC to power supply||100 – 240 VAC, 50/60 Hz|
|Standards||CE approved, UKCA approved EMC compliant and RoHS compliant|
The VC300 dispensing valve controller requires clean, dry compressed air for operation. It is recommended that factory air be supplied to the dispenser through a 5-micron filter/regulator. If no factory air is available, we are able to supply a range of low cost, very quiet compressors which are suitable.
|FISVC300||VC300 digital liquid dispenser|
|FIS5601911||Universal power adaptor (included)|
|FIS5601888||Foot pedal (included)|
|FIS561851||Hose assembly – compressed air input (included)|
|FIS5779K712||Push connect fitting – adapts 5/32″ OD tubing to 1/4″ stem (included)|
|Recommended additional items|
|FISDCK800||Dispensing component kit – includes small (3, 5, 10cc) syringe barrels and accessories, and an extensive selection of dispensing tips|
|FISQK-CSK||Dispensing consumables starter kit – includes all standard syringe barrels (3, 5, 10, 30, 55cc) and accessories, plus a selection of dispensing needles|
|FISQK-NSK||Dispensing needle sample kit – contains a variety of dispensing needles|
Let’s start by talking about your application
|01865 842842||[email protected]|
- Last updated: November 2022
- Version: 1.1
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.