IRS 2012-1 Low Density Light Weight Epoxy Potting Compound
About IRS 2012-1 Low Density Light Weight Epoxy Potting Compound
IRS 2012-1 is a very low density, light weight epoxy resin system with excellent physical properties. It can be used in systems where weight is critical (e.g. auto sport, motor racing, aerospace). IRS 2012-1 also has good transparency to RF signals or radio signals.
Features & Benefits
- Low density
- Contains advanced light weight fillers
- Excellent electrical properties
- Chemical resistance to solvents, oils, fuels, acids, bases and hydraulic fluids
- Good mechanical properties
- Low cure shrinkage
- Has uses in radio frequency applications, RF transparent
- Available in easy-to-use twinpacks
Part number change: as of version 6.0, October 2021, the part number of this product changed from IRS 2012 to IRS 2012-1. This is due to an unavoidable change in a formulation component. This change does not affect the product data-sheet specifications. The new formulation has passed internal testing and is deemed to be equivalent.
|100:45 resin to hardener by volume
70:30 resin to hardener by weight
|Pot life (100g mix)
|1 hour @ 23°C
|50 MPa (estimated)
|-55°C to 150°C
200°C short term
|Particularly resistant to fuels, lubricating oils, acids and bases.
Also resistant to hydraulic fluids, solvents
|Safety Data Sheets
|For the latest SDS for this product, please e-mail firstname.lastname@example.org
See how one customer got results from IRS 2012-1 for an electronics potting application in this Case Study:
|Application Insight – Tyre Pressure Sensor Potting
Potting vehicle tyre pressure monitoring sensors using IRS 2012-1.
IRS 2012-1 is available in twinpacks or in bulk.
The twinpack sachet is a clear film sachet, with the resin and hardener separated by a removable clip and rail divider. Click here for twinpack mixing instructions.
|Low Density Epoxy Potting Compound – 100 gram twinpack (approx 167 ml)
|Low Density Epoxy Potting Compound – 300 gram twinpack (approx 500 ml)
For optimal results, store away from strong alkalis, oxidising materials, strong acids and amines. The conditions must prevent the formation of sparks and static electricity, and the product must avoid excessive heat for prolonged periods of time while in storage. Keep only in the original container. Keep container upright and tightly closed, in a cool, well-ventilated place. Protect containers from damage. Bund storage facilities to prevent soil and water pollution in the event of spillage. The storage area floor should be leak-tight, jointless and not absorbent.
Let’s start by talking about your application
- Last updated: January 2024
- Version: 6.4
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.