About Peristaltic Pump Dispenser for Adhesives, Solvents & Low Viscosity Liquids
A peristaltic pump dispenser transfers low viscosity liquids by pressure displacement applied from a turning rotor against a tube carrying the material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
The IJF PPD-130 offers excellent features for air-free dispensing of materials such as cyanoacrylates, solvents, alkalines and acids. Dispense outputs can be timed from 0.01 – 99.99 seconds with flow speeds from 0.01-6 ml/min using PTFE tubing and from 0.1-20 ml/min using silicone tubing. The pump is bi-directional allowing snuff-back after dispense to prevent dripping of the fluid or to drain the material in the tube back into its container.
The IJF PPD-130 comes complete with a selection of nozzles and tubing to suit different viscosity materials. All consumable parts are readily available.
|Size||182 x 81 x 171mm|
|Input voltage||220V 50/60 Hz|
|Dispense time||0.01 – 99.99 seconds|
|Internal voltage||5V DC|
|Cycle initiation||Continuous & timed|
|Rotor speed||Up to 120 rpm (max)|
|Flow speed||0.01 – 6ml/min (PTFE tube)
0.1 – 20ml/min (silicone tube)
|Dispense pressure||Over 1.5 Kg/cm2|
|Direction of pump rotor||Both directions (forward & reverse)|
|Snuff-back||Programmable by reverse rotation|
|Digital display||Time count down|
|I/O||Connection for remote operation|
- Suitable for small shots and continuous operation
- Adjustable rotor speed in volume 0-10
- Self priming from bottle or jar
- For smaller volume dispensing at lower flow rates, Teflon tubing is used
- For larger volume dispensing at higher flow rates, silicone tubing is used
- System operated by finger switch on holder or remotely from I/O connector at rear of unit
- Timer display counts down for dispense
|IJFPPD-130-220||Peristaltic Pump Dispenser 220V|
|IJF562030-T||1||standard rotor for standard tubes|
|IJF560989-D||1||nozzle holder (with switch)|
|IJF561010-D||1||nozzle 1.7mm diameter|
|IJF561011-D||1||nozzle 2.1mm diameter|
|IJF561012-D||1||nozzle 2.6mm diameter|
|IJF561013-D||1||nozzle 3.5mm diameter|
|IJF560984P-10FT||1||hose, 1.0mm I.D., 1.6mm O.D.|
|IJF560985P-10FT||1||hose, 1.4mm I.D., 2.0mm O.D.|
|IJF560995P-10FT||1||hose, 1.9mm I.D., 2.5mm O.D.|
|IJF560996P-10FT||1||hose, 2.4mm I.D., 3.0mm O.D.|
|IJF562032-D||1||foot pedal (optional)|
Our technical sales team are on hand to discuss your application requirements. Click here to get in touch.
Find out more information on how to purchase.
- Last updated: October 2020
- Version: 3.2
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.