Dispensing Guns for Two Part Cartridge Systems
About Dispensing Guns for Two Part Cartridge Systems
Dispensing guns for adhesives and sealants which are supplied in two part cartridge systems. The cartridges are easily loaded into the gun, and a static mixing nozzle is applied. The gun gives control to the dispensing of the adhesive through the mixer nozzle, either with simple hand pressure, or with pneumatic input.
Features & Benefits
- Available in manual and pneumatic versions
- Select your gun based on the mix ratio of the cartridge and the cartridge size
50ml Cartridge Guns
50ml Cartridge Guns should be selected based on the mix ration of the cartridge.
The IDM835010 Dispensing Gun is used for oval end, “S”-type cartridges, rather than square end cartridges.
|Part number||Gun type||Mix ratio|
200ml Cartridge Guns
200ml Cartridge Guns are available in manual or pneumatically powered versions.
400ml Cartridge Guns
400ml Cartridge Guns are available in manual or pneumatically powered versions
500ml Cartridge Guns
500ml Cartridge Guns are available in manual or pneumatically powered versions.
- Last updated: November 2023
- Version: 4.5
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.