Designed for Fisnar F4000 ADVANCE series robots, the height sensor automatically adjusts the dispense tip height in the event of any variation of the height workpiece being dispensed upon. Setup and programming of the height sensor are carried out by following a user-friendly step-by-step procedure pre-installed onto the robot software.
By comparing the actual workpiece height against the original stored datum value in the robot program, any deviation found in the workpiece height results in the z-axis coordinate data being automatically offset accordingly. Multiple height checks can be made within one robot program in the event of multiple workpieces being processed or a single workpiece with differing heights.
|FISF4000AKIT-HDS||Fisnar Height Sensor for F4000 ADVANCE series robots|
- Last updated: October 2019
- Version: 1.0
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.