Description

Our PCB Repair Eyelets for plated through hole repair are pure copper, electroplated with tin unless otherwise stated. RoHS compliant.

Eyelet Selection Criteria

  1. ID – Inside Diameter
    Eyelet inside diameter should be 0.003″-0.020″ greater than the component lead diameter.
  2. OD – Outside Diameter
    The clearance hole in the circuit board should be 0.001″ to 0.005″ greater than the outside diameter.
  3. LUF – Length Under Flange
    The length of the flange should be 0.020″ – 0.035″ greater than the thickness of the circuit board.
  4. FD – Flange Diameter
    The flange diameter should be small enough to prevent interference with adjacent pads or circuits.

Features & Benefits

  • Two styles available
  • Complies with IPC recommended repair processes
  • RoHS compliant

Other Information

Our Technology Guides page has links to our comprehensive Rework & Repair Guide.

Ordering Information

All dimensions are in inches plus or minus .003″

Flat Flange Eyelets
Part No ID” OD” LUF” FD”
CRC115-7206 .020 .030 .094 .046
CRC115-7209 .020 .030 .120 .046
CRC115-7306 .030 .040 .093 .060
CRC115-7336 .033 .047 .093 .080
CRC115-7339 .033 .047 .125 .080
CRC115-7353 .035 .047 .062 .080
CRC115-7366 .036 .046 .093 .076
CRC115-7453 .045 .059 .062 .090
CRC115-7456 .045 .059 .090 .090
CRC115-7459 .045 .059 .125 .090
CRC115-7576 .057 .067 .095 .111
CRC115-7676 .067 .078 .097 .130
Funnel Flange Eyelets
Part No ID” OD” LUF” FD”
CRC115-8359 .035 .047 .118 .080
CRC115-8431 .043 .059 .156 .095
CRC115-8736 .073 .089 .093 .125

All Downloads

Filename Size Download
PCB Rework and Repair Guide 6.38MB
  • Last updated: January 2017
  • Version: 2.0

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.