| home > products > rework & repair > epoxy kit |    |
CRC115-1322
Epoxy Kit
for electronics and pcb repairs
- High strength/high temperature - withstands demanding physical environments
- Clear - can be tinted with colouring agents
- Twinpack packaging - eliminates mixing errors
- Complies with IPC recommended repair processes
- Complete instructions included
Description
The CRC115-3322 Epoxy Kit is ideal for the repair of printed circuit board damage.
This kit contains 10 packages of clear, low viscosity, superior strength
epoxy, precisely measured out into twinpack plastic packages so it is easy
to use and there is no measuring.
Once cured, this epoxy makes an effective electrical insulator with good high temperature mechanical and impact resistance properties. The epoxy can be used to fill in holes, gaps, burns or to inject into delaminated locations. The kit also contains mixing sticks, mixing cups and foam swabs.
Applications
- Repairing damaged base board
- Repairing damaged base board corners and edges
- Repairing damaged coatings and solder mask and solder resist
| Specifications | |
| Packaging | 2 gram twinpacks |
| Colour | Clear/transparent |
| Pot life | 30 minutes |
| Cure cycle | 24 hours at room temperature or 1 hour at 74°C |
| Viscosity (after mixing) | 1900 cps @ 25°C |
| Operating temperature range | -60°C to 140°C |
| Hardness | 88 Shore D |
| Dielectric strength | 410 volts/thou |
| Ordering information | ||
| Part number | Quantity |
Description |
| CRC115-1322 | 1 |
Epoxy Kit |
| Kit includes | ||
| CRC115-3302 | 10 |
Epoxy twinpacks |
| CRC235-2102 | 10 |
Foam swab, 3/16" tip |
| CRC115-3314 | 10 |
Mixing stick |
| CRC115-3312 | 10 |
Plastic cups |
| CRC115-3360 | 10 |
Plastic probes |
Colour Agents
Matching epoxy to the colour of the circuit board being repaired is a simple process when you use a colour agent. These are available in 2 gram tubes.
Applications
- Coating replacement
- Solder mask and solder resist repair
Features and Benefits
- Wide selection to match board colours
- Compatible - mixes well with epoxy
| Ordering information | ||
| Part number | Description | Colour |
| CRC115-9102 | Colour Agent, PMS102 - Yellow | |
| CRC115-9185 | Colour Agent, PMS185 - Red | |
| CRC115-9293 | Colour Agent, PMS293 - Blue | |
| CRC115-9348 | Colour Agent, PMS348 - Green | |
| CRC115-9358 | Colour Agent, PMS358 - Lt Green | |
| CRC115-9376 | Colour Agent, PMS376 - Med Green | |
| CRC115-9424 | Colour Agent, PMS424 - Dk Gray | |
| CRC115-9457 | Colour Agent, PMS457 - Lt Brown | |
| CRC115-9560 | Colour Agent, PMS560 - Dk Green | |
| CRC115-9561 | Colour Agent, PMS561 - Dk Green | |
| CRC115-9995 | Colour Agent - Black | |
| CRC115-9996 | Colour Agent - White | |
Other Information
Our Technical Resources page has links to:
- Our comprehensive Rework & Repair Guide
 |
See also! Conductive pen Overcoat pens for pcb mask repair
|
 |
Additional printed catalogue or brochure available |
 |
Obtain more information, samples or literature |
 |
Contact details and purchasing instructions |
| Category: | |
 |
Rework & Repair |
|
Main Product Index |
|
Search |
|
Home |
August 2008
Version 4.0
17 Station Field Industrial Estate, Banbury Road
KIDLINGTON, Oxfordshire, OX5 1JD, ENGLAND
Tel: +44 1865 842842 Fax: +44 1865 842172 info@intertronics.co.uk