Flux Dispenser Pen

Description
The ELM FD-1104-P Flux Dispenser Pen is ideal for applying fluxes in all rework situations. It is easily re-filled and can be transported in field service repair kits.

The ELM FD-1104-P Flux Dispenser Pen has a special applicator tip made from synthetic fibres, not felt. It is specially formed for a long-lasting fine point. Pens are sold with two replacement applicator tips, which are simply pushed into place.

Unlike pre-filled pens, the ELM FD-1104-P Flux Dispenser Pen can be filled with a range of rework fluxes; this is especially useful when a number of fluxes have been specified. It may also be used for certain solvents (e.g. IPA) oils, silicones or water.

Instructions
Filling
1) Pull off the flexible rubber end cap, together with the absorbent reservoir core
2) Immerse the reservoir core into liquid flux and squeeze the flexible rubber end cap, pulling flux into the reservoir one. Alternatively, leave core to absorb flux which may take several minutes
3) Replace core and cap back into Flux Dispenser Pen body, seating firmly
Note: Do not pour liquids directly into pen body. Overfilling in this way may cause leakage

When first filled, it may take several minutes for the flux to wick to the tip. For quick use, the tip may get wetted by dipping into the liquid flux.

If flux is not flowing adequately:
1) Confirm that there is flux in the pen
2) If tip is dry and hard, dip in solvent
3) Ensure that the reservoir core is on good contact with the inner end of the applicator tip. If it has become loose, the end of the core can be crimped with fingers to ensure a more intimate fit

See also!  Squeeze Jet - an inexpensive dispenser for low viscosity liquids like cyanoacrylates, superglues, inks, solvents, oils, fluxes and adhesives  No-Clean Flux Pen - no-clean flux for the high precision applications of prototype and rework/repair of printed circuit boards  Static dissipative 2 oz flux dispensing bottles  Flow-Seal pens and bottles

	Additional printed catalogue or brochure available
	Obtain more information, samples or literature
	Contact details and purchasing instructions

Category:
	Rework & Repair
	Main Product Index
	Search
	Home

November 2009
Version 2.1