About VC1195N Four-Way Dispense Valve Controller
The VC1195N is a 4-way dispense valve controller that can be used to control one or two valves simultaneously. The controller is particularly recommended for use with the Fisnar MV-0180LF Valve or Fisnar 790HP-LF Valve for faster actuation to deliver more accurate and repeatable dots or beads for any application.
The VC1195N valve controller provides a continuous “valve-off” state and remains in this mode until a signal is received to switch to “valve-on” mode. This instruction can derive from a remote robotic device or by the foot switch provided. When the timer is off, the valve will remain in “valve-on” state as long as the foot switch is pressed or to allow a robot to control the operation. When the timer is selected, a momentary pulse will activate the timer to open the valve for a programmed period and then close the valve automatically.
Features & Benefits
- Simultaneous control of two valves
- Timing interval of 0.01 – 31 seconds
- Fast response internal pneumatic solenoid
|Size (cm)||26.67 x 20.95 x 6.98|
|Dispense time||0.01 – 30 seconds|
|Cycle initiation||Momentary or continuous|
|Voltage||100 – 240 VAC 50/60Hz|
|Internal voltage||24 vdc|
|Air input||70 – 100psi (4.8-6.9 bar)|
|Air output||1 – 100psi (0.1-6.9 bar)|
|Introduction to Time/Pressure Dispensing
Download a presentation which describes the theory and practicalities of time/pressure dispensing
|FISVC1195N||4-way valve controller
Incl. Power cord with plug 220V, Input air hose with accessories, foot pedal and cord, 6 ft. air hoses x2
- Last updated: September 2020
- Version: 1.1
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.