About INT 755 High Temperature Masking Tape
INT 755 high temperature masking tape is based on crepe paper, coated with a silicone adhesive. Applications involve any high temperature masking, include wave soldering, hot air levelling (HAL), powder coating etc.
INT 755 is especially suitable for wave solder masking on printed circuit boards, even gold contacts. It can be removed after soldering without leaving adhesive residue.
INT 755 is particularly useful where static charges generated by film-based tapes are considered a problem, as the paper base of INT 755 generates much less static on application and removal. It is also recommended for masking printed circuit boards during hot air levelling (HAL). Best performance is achieved when the tape is applied and pressed down with rollers, preferably heated up to 100°C.
Features & Benefits
- High temperature resistance
- Coated with a silicone adhesive which does not leave adhesive residue upon removal
- The paper base generates much less static on application and removal
- Wave solder masking
- Hot air levelling
- Powder coating
|Base material||Impregnated crepe paper|
|Temperature resistance||Maximum 260°C for 20 seconds|
|Adhesive strength||2.0 N/cm|
|Tensile strength||35 N/cm|
|Standard roll length||55m|
|Standard roll widths||from 6mm up|
|Die cut discs||Standard diameters (mm)
4, 6, 8, 9, 10, 12, 16
Each roll is 66m in length.
|INT755-006||High Temperature Masking Tape 6mm width|
|INT755-009||High Temperature Masking Tape 9mm width|
|INT755-012||High Temperature Masking Tape 12mm width|
|INT755-015||High Temperature Masking Tape 15mm width|
|INT755-019||High Temperature Masking Tape 19mm width|
|INT755-025||High Temperature Masking Tape 25mm width|
|INT755-038||High Temperature Masking Tape 38mm width|
|INT755-050||High Temperature Masking Tape 50mm width|
- Last updated: October 2016
- Version: 3.0
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.