Born2Bond Structural Cyanoacrylate Adhesive
About Born2Bond Structural Cyanoacrylate Adhesive
Born2Bond™ Structural Cyanoacrylate Adhesive is a high-strength, high-temperature (120°C) hybrid cyanoacrylate adhesive that provides a fast fixture time at room temperature while maintaining good processability and the capability to bond gaps up to 5mm. This product offers excellent bonding characteristics to a large variety of substrates, including aluminium, plastics and elastomers, but also porous substrates, such as woods, chipboard and leather.
Born2Bond Structural is an incredibly tough, structural, fast curing two part (2K) cyanoacrylate adhesive, with a long open time.
Born2Bond Structural offers “on demand” structural bonding. Once mixed and applied, the exposed dot or bead has an open time of up to 30 minutes – but a fixture time of only seconds once the parts are assembled. This fixture and ultimate cure time compares favourably with other structural adhesive chemistries.
Formulated using MECA (methoxyethyl cyanoacrylate) chemistry, Born2Bond Structural is able to withstand temperatures up to 120°C, far exceeding the capabilities of standard cyanoacrylate adhesives. It offers a balance between bonding speed, long open time, bond strength (>6 MPa), and impact and environmental resistance.
Born2Bond Structural is supplied in a syringe cartridge, available in 10g and 50g sizes. Both cartridges come with static mixing nozzles. The 10g size is suitable for manual application and comes with a plunger. The 50g size is used with a dispensing gun for manual application, or can be integrated into automation.
Features & Benefits
- Fixture time of 30 seconds (substrate dependent)
- High adhesion strength: > 6 MPa after 5 min
- Able to withstand temperatures up to 120°C
- Impact resistant
- Open time up to 30 minutes
- Fills gaps up to 5 mm
- Excellent adhesion to many different substrates
- Translucent when cured
- Temperature and humidity resistance
- Gel consistency for precise application
- Excellent adhesion to aluminium (Al)
- Structural bonding
- Multiple substrate bonding
- Magnet bonding
- Gap filling
- Sensor bonding (i.e. in automotive tires)
- Bathroom accessories
|Typical properties||Born2Bond Structural|
|Viscosity (cps)||Part A: 100,000 – 150,000
Part B: 40,000 – 80,000
|Gap Fill (cm)||0.5|
|Fixture Time (sec)||30 – 90|
|Bond Strength (MPa)||16|
|Temperature Use Range (°C)||-40 to 120|
|Hardness Shore D||65|
|Refractive Index (ABBE)||1.49 – 1.50|
|Glass Transition Temperature (°C)||91|
|Volume Resistivity (Ohm.m)||4.6·1010|
|Specific Gravity (g/mL)||Part A: 1.06
Part B: 1.10
|Safety Data Sheets|
|For the latest SDS for this product, please e-mail [email protected]|
Blend of PC and ABS
Powder coated or
Grit blasted mild steel
Key: = Moderate = Good = Excellent
|Adhesive Problem? What’s the Cure?
A guide to adhesive bonding, considering structural bonding and the criteria involved for successful assembly.
|The 10 Myths Abaout Cyanoacrylate Adhesives
This guide provides an overview to cyanoacrylate adhesives and dispels 10 of their most widely believed myths.
Find out more about the technology behind the Born2Bond Structural by reading our technical bulletins and white papers:
|B2B30619518||Born2Bond Structural cyanoacrylate adhesive||10g side‐by‐side cartridge & 5 static mixing nozzles|
|B2B30619584||Born2Bond Structural cyanoacrylate adhesive||50g side‐by‐side cartridge & 8 static mixing nozzles|
|B2B30615440||Born2Bond Primer||30ml bottle|
|IDM805004||Manual Dispensing Gun|
Let’s start by talking about your application
|01865 842842||[email protected]|
- Last updated: November 2022
- Version: 2.1
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.