Born2Bond Repair Cyanoacrylate Adhesives
About Born2Bond Repair Cyanoacrylate Adhesives
Born2Bond™ Repair is a patented, gap-filling, “instant” adhesive and repair product with excellent adhesion to a very broad range of materials and surfaces. Combining the strength of an epoxy adhesive with the speed of an instant cyanoacrylate adhesive, it is an ideal option for rapid bonding and repairing applications.
This product is an ideal repair adhesive/filler, due to a curing time of under ten minutes resulting in a tough polymer, with a user-friendly working time and the ability to fill even large gaps with minimal volumetric shrinkage.
The gel consistency of Born2Bond Repair enables application in any orientation while the static mixing nozzle ensures uniform and precise application.
Born2Bond Repair is faster and tougher with half the level of shrinkage compared to competitive cyanoacrylate adhesive products.
Born2Bond Repair is supplied in a syringe cartridge, available in 10g and 50g sizes. Both cartridges come with static mixing nozzles. The 10g size is suitable for manual application and comes with a plunger. The 50g size is used with a dispensing gun for manual application, or can be integrated into automation.
Features & Benefits
- Fixture in 60 seconds
- Cures in 5-10 minutes
- Instant adhesion with a high bond strength
- Low volume shrinkage
- Fills gaps of any volume
- Bonds a large range of materials
- May be machined, drilled, sanded and painted
- Impact resistant
- Gel consistency for precise application
- Non-sagging for vertical applications
- Aftermarket automotive repairs
- Wood repair and reconstruction
- Rubber door bonding
- Automotive joint bonding
|Typical properties||Born2Bond Repair|
|Viscosity (cps)||Part A: 130,000 – 180,000
Part B: 70,000 – 130,000
|Fixture Time (sec)||15-60|
|Bond Strength (MPa)||14|
|Temperature Use Range (°C)||-40 to 80|
|Hardness Shore D||67|
|Refractive Index (ABBE)||Opaque|
|Glass Transition Temperature (°C)||86|
|Coefficient of Linear Thermal Expansion||58 x 10-6|
|Volume Resistivity (Ohm.m)||3.2·1013|
|Specific Gravity (g/mL)||1.09|
|Safety Data Sheets|
|For the latest SDS for this product, please e-mail [email protected]|
Blend of PC and ABS
Powder coated or
Grit blasted mild steel
Key: = Moderate = Good = Excellent
|B2B30622922||Born2Bond Repair cyanoacrylate adhesive||10g side‐by‐side cartridge & 5 static mixing nozzles|
|B2B30622419||Born2Bond Repair cyanoacrylate adhesive||50g side‐by‐side cartridge & 8 static mixing nozzles|
|B2B30615440||Born2Bond Primer||30ml bottle|
|IDM805004||Manual Dispensing Gun|
Let’s start by talking about your application
|01865 842842||[email protected]|
- Last updated: November 2022
- Version: 1.6
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.