About Opti-tec 5020-2 Clear Epoxy Potting Compound

Also available to buy online at  Available at Intertronics.shop

Opti-tec 5020-2 is a clear, two component, low viscosity optical epoxy which will cure in thick sections at room temperature. In thin sections, it is clear and transparent. In thicker sections, it can take a yellow or straw tint. Opti-tec 5020-2 is designed for potting and encapsulation of components where optical clarity, good wetting and low viscosity are important.

Opti-tec 5020-2-B is a black version with similar properties. See Specifications tab for details.

Features & Benefits

  • Available in clear or black versions
  • Degree of flexibility which reduces internal stresses
  • Relatively low level of exotherm during cure making it safe to use with delicate components
  • One hour pot life after mixing and cures within 24 hours at room temperature in thick sections
  • Low viscosity allowing it to fill voids without air entrapment
  • High gloss finish even when cured under high humidity
  • Available in easy-to-use twin packs or bulk

Applications

  • Potting or encapsulation
  • Encapsulation of larger components
  • Optical assembly, optical filters, LEDs
  • Optoelectronics
  • Void filling in cables

Specifications

Part number change: as of version 8.0, October 2021, the part number of this product changed from Opti-tec 5020-1 to Opti-tec 5020-2 and Opti-tec 5020-1-B to Optic-tec 5020-2-B. This is due to an unavoidable change in a formulation component. This change does not affect the product data-sheet specifications. The new formulation has passed internal testing and is deemed to be equivalent.

 

Opti-tec 5020-2

Specification
Mix ratio 2:1 resin to hardener
Mixed viscosity 1 Pa.s (1000 cps) @ 25°C
Colour Clear/straw
Density 1.15
Pot life 75 minutes @ 25°C
Cure schedule Bondline temperature
25°C
60°C
Time
24 hours
4 hours
Rate of cure will depend on temperature and volume. Thin films will take 2-3 days at 25°C.
Cured properties
Hardness, Shore D 60-65
Temperature range -55 to 115°C
Tensile strength 50 MPa
Dielectric strength 13 kV/mm
Dielectric constant 4
Volume resistivity 1414 ohm.m
Shelf life 12 months from date of manufacture in original sealed containers

 

Opti-tec 5020-2-B BLACK

Specification
Mix ratio 2:1 resin to hardener
Mixed viscosity 1 Pa.s (1000 cps) @ 25°C
Colour Black
Density 1.15
Pot life 75 minutes @ 25°C
Cure schedule Bondline temperature
25°C
60°C
Time
24 hours
4 hours
Rate of cure will depend on temperature and volume. Thin films will take 2-3 days at 25°C.
Cured properties
Hardness, Shore D 60
Temperature range -55 to 115°C
Tensile strength 50 MPa
Dielectric strength 13 kV/mm
Dielectric constant 4
Volume resistivity 1014 ohm.m
Shelf life 12 months from date of manufacture in original sealed containers

 

Safety Data Sheets
For the latest SDS for this product, please e-mail msds@intertronics.co.uk

All Downloads

Filename Size Download
OPT 5020-2 Product Data Sheet 0.09MB

Ordering Information

Opti-tec 5020-2 is available in twinpacks or in bulk.

Twinpack packaging

The twinpack sachet is a clear film sachet, with the resin and hardener separated by a removable clip and rail divider. Click here for twinpack mixing instructions.

Standard twinpack size is 100g total weight.

Part number Description
OPT5020-2-100G
Click here to buy on intertronics.shop
Clear Epoxy Potting Compound – 100g twinpack sachet
OPT5020-2-750G
Click here to buy on intertronics.shop
Clear Epoxy Potting Compound – 750g kit
OPT5020-2-B-100G Black Epoxy Potting Compound – 100g twinpack sachet
OPT5020-2-B-750G Black Epoxy Potting Compound – 750g kit

For optimal results, store away from strong alkalis, oxidising materials, acids, amines and oxidising agents. Prevent storage where formation of sparks or static electricity could be present. Keep only in the original container. Keep container tightly closed and upright, in a cool, well-ventilated place. Protect containers from damage. Bund storage facilities to prevent soil and water pollution in the event of spillage. The storage area floor should be leak-tight, jointless and not absorbent.

 


Let’s start by talking about your application

orange_phone01865 842842 orange_email  orders@intertronics.co.uk


  • If you’re in the UK, knowing your postcode would help us get in touch even more quickly. If you’re outside the UK, please indicate your country.
  •  

    Any information that you submit using this form will be processed according to our privacy policy.

  • This field is for validation purposes and should be left unchanged.

  • Last updated: January 2024
  • Version: 8.2

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.