Category: dispensing

Thinky mixers and precision dosing at Making Pharmaceuticals Exhibition, 24-25th April 2018, Coventry

The mixing together of liquids, pastes, powders and fillers is a critical process in many sectors, not least in pharmaceutical and cosmetics R&D and production. Getting a fully homogeneous bubble-free mix of materials, especially those with different forms or viscosities, is of paramount concern. Speed and repeatability of the pharmaceutical mixing process will aid productivity […]

Read More

Adhesive and solder paste dispenser offers enhanced control

The FIS SL101N Digital Liquid Dispenser, Adhesive and Solder Paste Dispensing Controller delivers the accurate and repeatable dispensing of fluids such as solder pastes, adhesives, cyanoacrylate adhesives, solvents, greases, sealants, coatings, and temporary masking materials. The SL101N gives the operator control and increased repeatability over the dispensing of dots, lines and beads, and small potting or […]

Read More

Precision liquid dispensing – ultra-fast, super accurate jetting valve

The Vermes MDS 3010+ and Vermes MDS 3020+ Microdispensing Jetting Valves are designed for precision dispensing of material in small volumes at fast speeds with extremely high accuracy and repeatability. The piezo-actuated valves satisfy the trend for increasing miniaturisation of components in production processes – demanding ever-smaller deposits of beads and lines – as well as the requirement to […]

Read More

Beyond the benchtop: gantry robots for larger applications and production lines

Gantry robots provide the reliability of precisely positioned dispensing for conveyor operations requiring a Cartesian gantry robot, or for bench applications that require XYZ movement above the work. These robots can increase your production output and product quality with consistent results on every piece. With simple, fully-supported implementation from our Technical Team here at Intertronics you will […]

Read More

Case study: precision epoxy dispensing helps electrical manufacturer improve quality and yield, and reduce waste

Based in Boston, Lincolnshire, Parkinson Harness Technology is a manufacturer of bespoke electrical products to industries such as construction, agriculture, rail and defence. It produces a variety of products including wiring harnesses, control panels, battery/power leads, PCBs and control systems mainly for use in specialist vehicle manufacture. Parkinson Harness Technology also offers engineering support services […]

Read More

Handheld diaphragm dispensing valves offer affordable, accurate fluid application

Our IDM HDV Handheld Diaphragm Dispensing Valves are suitable for applications which demand accurate dispensing of adhesives alongside the flexibility of manual operation. They provide controlled dosing, and offer a number of benefits over other dispensing methods such as: Accurate dispensing of low viscosity fluids such as cyanoacrylates Comfortable shape for handheld operation Pneumatic or […]

Read More

Case study: automated silicone dispensing for illuminators in the detector and security industry

Our customer, GJD designs, produces and sells intruder detection products at its factory and head office in Heywood, Greater Manchester. One of GJD’s main products is its line of white-light and infra-red LED illuminators, marketed under the company’s Clarius® brand. Used principally in security applications, they also find other uses, including broadcast production. High performance […]

Read More

Precision metering, mixing & dispensing facilitates miniaturisation

Trends in miniaturisation call for smaller, more precise and ever more repeatable metering, mixing & dispensing units for two-part materials. The preeflow® eco-duo330 sets new standards in micro-dosing for two component systems by providing dosages as small as 0.2 to 32ml/min with precisely mixed material, complete repeatability and exceptional control. This is expected to be of particular value […]

Read More

Case study: preeflow volumetric adhesive dispensing helps ensure integrity of life-saving medical device

Our customer BPR Medical, based in Mansfield, Nottingham, is a perfect example of a small British company which combines expertise, creativity and entrepreneurialism to design, develop and manufacture world-beating products for export worldwide and use in the United Kingdom, for which it was rewarded in 2012 with a Queen’s Award for Enterprise: Innovation. As with […]

Read More

Repeatability, precision, reliability and accuracy in dispensing

The method of using a positive displacement technology for the dispensing or dosing of liquids can bring many benefits to those for whom repeatability, precision, reliability and accuracy are important. preeflow volumetric dispensing pumps have found applications in sectors such as electronics and semiconductor manufacturing, aerospace, medical device assembly and pharmaceuticals – from the application […]

Read More

High precision volumetric spray dispensing system

preeflow® eco-SPRAY technology brings exceptional levels of accuracy, repeatability and precise edge definition to micro-spray dispensing tasks. The combination of the preeflow positive displacement volumetric pump and a low-flow spray chamber guarantees high performance spraying of low to high viscosity fluids. This volumetric spray dispensing system provides a superior level of process reliability because viscosity variations in […]

Read More

White Paper – Contactless Jetting Improves Lubrication Speed and Accuracy

Lubrication of mechanical and electromechanical assemblies should be a precise science, with applied material volume and placement accuracy critical to effectiveness. The new White Paper Contactless Jetting Improves Lubrication Speed and Accuracy describes technology which combines the accuracy and precision of a positive displacement dispensing technique with the speed and adaptability of the jetting principle. It […]

Read More

Material mixing and dispensing prove key for LED production quality

British LED manufacturer Plessey Semiconductors have successfully made the transition from the manufacturing development phase (where manual methods of material preparation and application often suffice) to full production by employing some of our automated mixing and dispensing technologies. Carl Withers, Plessey’s Assembly Development Team Leader, explained: We develop leading edge LED technologies, based on Plessey’s […]

Read More

Compact inline pressure sensor for dispensing/dosing monitoring and verification

The new flowplus16 pressure sensor offers high accuracy monitoring in an innovative design suited to critical dosing and dispensing applications. Accurate in-line pressure sensing can deliver to you important quality assurance in a whole range of automatic processes – for example, in medical, pharmaceutical and semi-conductor manufacturing, as well as the wider areas of process control. […]

Read More

Liquidyn P-Jet CT high performance jetting valve for micro-dispensing

The Liquidyn P-Jet CT  Jetting Valve brings to manufacturers the capability for high performance micro-dispensing of materials such as oils, greases, adhesives, silicones, paints, flux, pharmaceutical media and other chemicals, including filled fluids. Its speed and accuracy is expected to be valuable in the electronics, solar, automotive, packaging and medical device industries, amongst others. The […]

Read More

High speed, accurate, jet dispensing of adhesives, fluxes, greases and other liquids

With the widening trend in miniaturisation in many industries has come the need for precise, reliable dispensing of small (micro) quantities of adhesives and other chemicals. To cater for this, we’ve partnered with Liquidyn – the leading manufacturer of high precision, contactless jet dispensing valves. Liquidyn’s proven technology delivers stable, accurate, fast and flexible performance […]

Read More

Precision metering, mixing and dispensing of two part adhesive and resin systems

The preeflow® eco-DUO450 is a two-component precision volumetric, positive displacement, dosing/mixing/dispensing system that gives you accuracy and repeatability. The preeflow eco-DUO450 uses the precision dispensing technology of the preeflow eco-PEN – by integrating two eco-PENS through a manifold and a static mixing nozzle, and provides extremely precise metering, mixing and dispensing of critical two-part materials like epoxies and silicones. The preeflow® eco-DUO450 can dispense as […]

Read More

Precision, volumetric dispensing of adhesives, oils, inks, encapsulants & solder pastes

Following the recent announcement of our distribution agreement for the preeflow® dosing brand from ViscoTec, we are delighted to introduce the preeflow eco-PEN series dispensing equipment and matching controllers. These all-electronic systems are ideal for continuous highly accurate dispensing of adhesives, solder pastes, encapsulants, oils, catalysts, etc. in industries such as optics, fibre optics, medical devices, […]

Read More

Precision volumetric dosing for highly accurate, repeatable dispensing

High precision, accuracy and repeatability in dispensing is becoming ever more important to our customers. Consequently INTERTRONICS, in partnership ViscoTec, will now be supplying UK industry with the latest in preeflow precision volumetric, positive displacement, dosing/dispensing systems. Preeflow volumetric dosing equipment, manufactured by ViscoTec, is capable of dispensing adhesives, pastes, form-in-place gaskets, sealants, etc – in dots, […]

Read More