| home > products > uv lamps, curing equipment, blacklights > uv curing flood lamp |    |
UV Curing Flood Lamp
- High intensity, 250W UV
- Hand-held or fixed mounting
- Highly portable
- Flexible
Description
IUV 250 UV Curing Flood Lamp is a high intensity, versatile, hand-held or fixed mounting UV lamp for applications including the curing of adhesives, coatings, and potting materials. The IUV 250, with its separate power supply, is suitable for many applications where a portable and mobile lamp is required. Its high lamp output and intensity offer excellent curing results in seconds, depending on adhesives and substrates.
Applications
- Curing of UV adhesives for glass, plastic & metals
- Curing of UV potting on electrical & electronic components
- Non-destructive testing (NDT)
- Fluorescence inspection in quality control environments for the engineering, aviation, textiles & printing industries
- Micro-contamination detection in clean rooms
- Production and repair of 3D models from stereolithography (UV hardening polyester resins)
Features & Benefits
- High performance 250 watt hand-held UV lamp with separate power supply unit
- Aluminium UV lamp unit is compact, lightweight and extremely durable
- Illumination area is typically 130mm x 75mm
- Fan cooled for low UV lamp housing temperatures
- Glass filter assembly is fitted to a hinged front door, enabling easy access for UV bulb and glass filter replacement and cleaning
- Elapsed hour counter for UV bulb change scheduling
- Auto reset thermal safety cut out
- Wire mesh over filter glass for protection
Filters
The IUV 250 comes with a 140mm x 85mm glass filter, which is fitted into a holder.
A specified glass filter assembly is fitted when ordering, and different ones are easily
retrofitted. Other options are available for special applications. Please consult
with us if you need advice as to the best filter for your application.
| Part no | Description | Transmission wavelengths | Applications |
| IUV250-20 | Clear UV-A | 315nm upwards | Provides high intensity long wave UV-A and bright visible light. Suitable for curing UV and UV/visible light adhesives, coatings, etc. |
| IUV250-21 | Blue UV-A | 315nm to 460nm | Provides high intensity long wave UV-A and some visible blue light. Suitable for UV curing. This filter cuts down on the bright visible glare from the Clear UV-A filter, but gives approximately 20% less curing energy. |
| IUV250-22 | Black UV-A | 315nm to 405nm | Provides high intensity long wave UV-A "black light", no visible light. Suitable for NDT and inspection where visible light would make the fluorescent response more difficult to detect. |
Clear UV-A Glass Filter Assembly
Options
When switched on, we recommend that the IUV 250 UV Curing Flood Lamp be stored
on our IUV250-30 Stand, which has an integral light shield. This stand has
mounting holes which allow it to be fixed to a bench. Alternatively, the IUV250-31
Fixed Mounting Bracket can be attached to the lamp with adjusting hand wheels,
allowing the IUV 250 to be fixed to a wall, ceiling or bench and angled to
suit. A 5 metre power extension cable (from lamp to power supply) is available
for maximum mobility.
Stand with integral shield
Fixed mounting bracket
| Specifications | |
| Bulb | High intensity discharge 250W, iron doped metal halide
(ozone free) (Other options available for special applications) |
| Bulb life | Approx 500 hours - depending upon age, environment, switching and cooling |
| Illumination area | 130mm x 75mm (distance dependent) |
| Reflector | Aluminium - full spectrum grade |
| Power supply requirement | 230V/50Hz (115V/50/60Hz available to special order) |
| Power | 250W |
| Noise | < 70 dB |
| Rating | IP40 |
| Integral fuse protection | 2 x 4A miniature time-lag fuses ceramic body 5mm x 20mm |
| Construction material | Sheet aluminium |
| Finish | UV stable black polyester powder coating |
| Connecting cable length | 3m (optional 5m extension) |
| Weight of UV lamp unit | 1.5 kg |
| Dimensions of power supply unit (l x w x h) | ~350 x 205 x 85 mm |
Spectral output of unfiltered IUV 250 UV bulb
| Ordering information | |
| Part no | Description |
| IUV250 | UV Curing Flood Lamp 230V/50Hz |
| IUV250B | UV Curing Flood Lamp 230V/50Hz with Blue UV-A Glass Filter |
| IUV250L | UV Flood Lamp 230V/50Hz with Black UV-A Glass Filter |
| IUV250-10 | Replacement Bulb (Iron Doped Metal Halide) |
| IUV250-20 | Clear UV-A Glass Filter Assembly |
| IUV250-21 | Blue UV-A Glass Filter Assembly |
| IUV250-22 | Black UV-A Glass Filter Assembly |
| IUV250-30 | Stand with Shield |
| IUV250-31 | Fixed Mounting Bracket |
| IUV250-32 | Lamp Extension Cable 5 metres |
 |
See also! Higher intensity UV curing systems Light curing and UV curing adhesives UV curing glass adhesives
|
 |
Contact details and how to order |
| Category: | |
 |
UV Lamps, Curing Equipment, Blacklights |
|
Main Product Index |
|
Search |
|
Home |
August 2006
Version 1.1
17 Station Field Industrial Estate, Banbury Road
KIDLINGTON, Oxfordshire, OX5 1JD, ENGLAND
Tel: +44 1865 842842 Fax: +44 1865 842172 info@intertronics.co.uk