Dispensing Valves

Description
Our range of Dispensing Valves is quite comprehensive. The are controlled pneumatically (often by one of our Dispensing Controllers like the IJF DSPE501). They offer accurate and repeatable micro dispensing of a range of industrial liquids such as adhesives, inks, coatings, solvents and sealants. They can be mounted on one of our robotic dispensing solutions or hand-held.

Selector Guide
	IJF CV629 Cartridge Valve The CV629 Cartridge Valve is a pneumatically operated dispensing valve designed for precision dispensing of all types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc. Shot sizes may be fine tuned by turning the adjustment screw at the top of the valve; hence the CV629 valve is recommended for applications where micro deposits are required. Suitable for hand-held use.
	IJF DV509 Diaphragm Valve The DV509 series of Diaphragm Valves is designed for precise flow control of low to medium viscosity liquids. The diaphragm separates the wetted parts from the air supply and therefore it is ideal for dispensing cyanoacrylates, reagents, UV adhesives, paints, inks, solvents, glues, electrolytes, alcohol and other volatile substances.
	IJF 790 High Pressure Spool Valve The IJF 790 series of High-pressure Spool Valves are an ideal economic choice to dispense high viscosity materials such as silicones, RTVs, sealants and greases. The 790 provides a snap-release shut off after dispensing, resulting in a suck-back at the fluid outlet, thus preventing any drip or post-dispense extrusion.
	IJF LV-0126NM High Pressure Dispense Valve The LV-0126NM High Pressure Dispense Valve is a high-pressure dispensing valve suitable for high viscosity materials at fluid pressures up to 3500 psi. It also features a shot size stroke adjustment knob, which can easily fine-tune the front closing needle valve for precise deposits.
	IJF MV-0180NM Micro-shot Mini Valve The IJF MV-0180NM Micro-shot Mini Valve is a dispensing needle valve designed for precision dispensing of all types of fluids in minute to moderate shot sizes. Its optional lightweight pencil-type grip makes the valve suitable for either hand held or automatic applications. Shot sizes may be fine tuned by turning the adjustment knob at the top.
	IJF 710PTNM Pinch Tube Valve The IJF 710PTNM Pinch Tube Valve is engineered for precise control of semi-viscous liquids including mixed two-part component fluids and cyanoacrylates. The only part of the valve making contact with the fluid being dispensed is the disposable pinch tube assembly.
	IJF PDV-1000 Positive Displacement Screw Valve The IJF PDV-1000 series of Positive Displacement Screw Valves is suitable for all medium to high-viscosity pastes, epoxies, solder pastes and other filled materials. Capable of dispensing a minimum shot size of 0.5mm, the PDV-1000 uses an archimedes type servo-motor driven auger screw.
	IJF SV1217 Spray Valve The IJF SV1217 Spray Valve provides close tolerance spray dispensing of fluids up to 1000 cps, including urethanes, flux and paints. The material is fed from a pressure reservoir. Each valve is actuated by air pressure sequenced by a controller. The operating air pressure opens a needle valve allowing material to flow; a separate air line creates pressure in the air cap, atomising the fluid. The SV1217 is adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern.
	IJF VDP150 Positive Displacement Valve The IJF VDP150 Positive Displacement Valve is a plunger pump pneumatically operated positive displacement valve designed for dispensing constant volume shots of low to medium viscosity materials. The VDP150 has two integral check valves to control the flow of material.

Our Technical Bulletins & Articles page has links to:

• Article: Improving Industrial Dispensing with Pneumatic Dispensing Valves

See also!  The JBE1113 Automatic Liquid Dispenser, with its versatile design, is perfectly suited to a wide variety of dispensing applications  Fully automatic dispensing with robots  Temporary solder mask dispensing  Cyanoacrylate dispensing

	Additional printed catalogue or brochure available
	Obtain more information, samples or literature
	Contact details and how to order

Category:
	Dispensing
	Main Product Index
	Search
	Home

February 2008
Version 1.3