home > products > masking > speedmask temporary masking resins Main product index Search Home
DYMAX

Dymax logo
SpeedMask™
Temporary Masking Resins
Replace Tape, Wax, Lacquers and Fixtures
  • Apply and cure in seconds
  • Reduce labour, rework and scrap
  • Easy to automate
  • Environmentally and worker friendly
  • Metallurgically neutral
  • Minimal capital investment
  • Major OEM approvals

Description
Replace tape, wax, lacquers and fixtures with DYMAX SpeedMask masking resins, which offer reliable protection against most metal finishing processing environments. Their tenacious adhesion seals and protects machined, ground, or polished surfaces during tumbling, peening, abrading or cleaning processes.

Grinding and peening masks eliminate external damage to edges and surfaces and internal cavity FOD. SpeedMask resins also seal cavity openings and prevent contamination from acid, alkaline and plating solutions, as well as the debris from air plasma spray, HVOF, peening and grit blasting.

DYMAX advanced technology SpeedMask UV resins, curing lamps and accessories simplify regulatory compliance, and bring efficiency and cost reduction to new parts manufacturing, overhaul and repair, turbine and metal finishing, as well as orthopedic implant, surgical instrument and medical device component processing. Clean burn-off grades and peelable and water soluble masks are available.

Masking for acid stripping
Masking for acid stripping		 Plating mask
Plating mask		 Masking against grit blasting
Masking against grit blasting
Removal of a peelable mask
Removal of a peelable mask		 APS thermal barrier
APS thermal barrier		 Masking of turbine blades
Masking of turbine blades
Product Selector Guide
Product Application Features
UV Curable, High Adhesion Burn-off Grades
Incinerate cleanly at 650°C in air furnace
DYM 703 Spray applications including cavity sealant; grinding mask; acid (HCL) stripping mask; electroplating Resists HCL and other acids/alkalis; cures to 6mm deep; tough; machines and abrades cleanly
DYM 706 Cavity sealant; grinding mask; acid (HCL) stripping mask; electroplating; air/electron beam plasma spray mask Gel; hard, matte finish; non-slumping
DYM 706-H Cavity sealant; grinding mask; acid (HCL) stripping mask; YAG and CO2 laser drilling mask Cures in shadow areas; non-slumping; UV light and 150°C thermal
DYM 707 Cavity sealant; grinding mask; acid (HCL) stripping mask; YAG and CO2 laser drilling mask Low viscosity; protects from beam impingement; cures in shadowed areas
DYM 718 Cavity sealant; grinding mask; acid (HCL) stripping mask; electroplating; hardcoat mask Resistant to APS and HVOF coating processes
DYM 720 Cavity sealant; grinding mask; acid (HCL) stripping mask; electroplating Highest adhesion; translucent colour; most acid resistant
DYM 722 Cavity sealant; grinding mask; acid (HCL) stripping mask; electroplating; air/electron beam plasma mask spray Non-slumping; leaves no residue; resistant to chemical processing
UV Curable Peelable Masks
Peel easily at room temperature or with mild heat 50-65°C
DYM 708 MCrAlY and TBC feature protection; edge protection; cavity sealant Low adhesion; manually peel off
DYM 708-Gel MCrAlY and TBC feature protection; edge protection; cavity sealant Non-slumping gel; manually peel off
DYM 708-S Cavity sealant; grinding mask; peening mask; grit blast mask; MCrAlY and TBC feature protection; edge protection during transportation Low adhesion; easy manual peel off; ideal for spray applications
DYM 711 TBC feature protection; airfoil edge protection; cooling cavity sealant; cold airflow testing mask Higher adhesion
DYM 712 Cavity sealant; grinding mask; peening mask; electroplating; grit blast mask; hardcoat mask Ideal for spray application; peels easily after warm water soak
DYM 712-R Cavity sealant; grinding mask; peening mask; electroplating; grit blast mask; hardcoat mask Same as 712; red in colour for greater visibility
DYM 716 Cavity sealant; grinding mask; peening mask; grit blast mask; electroplating; anodising coating mask Plating solution resistant; aggressive grit blast resistant; leaves no residue
DYM 717 Cavity sealant; grinding mask; peening mask; grit blast mask; electroplating; anodising coating mask Spray, brush or dip to apply; peels off easily after hot water rinse
DYM 717-R Cavity sealant; grinding mask; peening mask; grit blast mask; electroplating; anodising coating mask Same as 717; red in colour for greater visibility
DYM 719 Grinding mask; grit blast mask; electroplating; grit blast mask; anodising coating mask Resistant to plating or anodising baths; peels off after hot water rinse
DYM 721 Grinding mask; peening mask; grit blast mask; anodising coating mask; acid stripping mask Resists chemical processing baths; ideal for spray, brush or dip application; peels easily after hot water rinse
DYM 723-R Cavity sealant; grinding mask; peening mask; grit blast mask; electroplating; hardcoat mask; anodise coating mask; chemical milling mask Resists most acids and alkalis; red in colour for greater visibility; peels off easily; leaves no residue
UV Curable Water Soluble Masks
Wash off with hot water spray or agitated bath 60-80°C
DYM 713-Gel Grinding mask; grit blast mask; peening mask; cavity sealant Easy, automated removal; no heat or manual labour required; for use where parts cannot be exposed to high temperatures
DYM 714*
DYM 714-C
Other Information
Download the DYMAX SpeedMask Temporary Masking Resins Selector Guide (409Kb) SpeedMask Selector Guide

Our Technical Bulletins & Articles page has links to:

  • Article: Environmentally Safe, UV Curable Masking Resins Reduce Aircraft Component Manufacturing Costs
See also! See also!
 UV lamps and UV curing equipment
 UV curable masks for electronics applications
Additional information Additional printed catalogue or brochure available
Obtain more information Obtain more information, samples or literature
Contact us Contact details and how to order
Category:
Masking
Main product index Main Product Index
Search Search
Home Home

August 2008
Version 1.1

 adhere - better bonding from intertronics
17 Station Field Industrial Estate, Banbury Road
KIDLINGTON, Oxfordshire, OX5 1JD, ENGLAND
Tel: +44 1865 842842   Fax: +44 1865 842172   info@intertronics.co.uk
Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.
© INTERTRONICS 1997, 2008