Autotube Dispensing System
for collapsible tubes

Description
The Autotube Dispensing System was designed to dispense any liquids, pastes, greases, silicones or similar liquids directly from their collapsible "toothpaste" tube. It minimises messy transfer of material as well as air bubbles and contamination, and provides dispensing control and accuracy. The Autotube addresses the waste issues and discomfort which result when dispensing from collapsible tubes.

In this system, an adapter and cartridge are attached to the collapsible material tube, which is then placed into a cartridge retainer. The retainer is pressurised and controlled by pressure dispenser for even and controlled material output. The cartridge retainer can be supported in a gun handle with a trigger switch to actuate the pressure dispenser, or mounted on a stand and activated using a foot switch.

Collapsible toothpaste-type tubes

Standard components
Part no	Description	IJF ATD-100C System	IJF ATD-200C System	IJF ATD-300C System
IJF 560059	Connecting hose
IJF 560062	6oz Cartridge
IJF 560517	8oz Cartridge
IJF 560068A	6oz Cartridge retainer
IJF 560520A	8oz Cartridge retainer
IJF 560065A	Retainer cap
IJF 560545	Male luer lock tip adapter
IJF 880001-A	Adapter "A"
IJF 880001-B	Adapter "B"
IJF 880001-C	Adapter "C"
IJF 880001-D	Adapter "D"
IJF 880001-Blank	Adapter blank
IJF 560516A	310ml cartridge
IJF 580091A	310ml retainer & cap
IJF 560600	Gun handle only	option - order separately
IJF 560599	Switch assembly only	option - order separately
IJF 560598	Gun handle & switch assembly	option - order separately

Ordering details
Determine which size cartridge is needed to hold your collapsible tube. Order an IJF ATD-100C, IJF ATD-200C or IJF ATD-300C system as appropriate. Each system comes with four Adapters (IJF 880001-A, -B, -C, -D), one of which should thread onto the collapsible tube. These adapters cover most of the common sizes; however, if one of these four does not fit, then an Adapter Blank (IJF 880001-Blank) is supplied which can be machined to suit.

If in any doubt, we recommend that you supply us with a sample of the collapsible tube for us to determine if the Autotube Dispensing System is suitable.

The Autotube Dispensing System is controlled by a pressure dispenser. We recommend the use of an IJF DSPE501A Automatic Liquid Dispenser, which features a larger internal air solenoid for operations which require an immediate and fast reaction for de-pressurisation. The higher volume exhaust prevents post compression of materials contained in tubes, avoiding stringing. An IJF 560545 Luer lock tip adapter is fitted to allow the use of standard dispensing needles.

See also!  IJF DSPE 501A Automatic Liquid Dispenser features a larger internal air solenoid recommended for operations which require an immediate and fast reaction for de-pressurisation  Dispensing Cartridges  310ml Cartridge Guns  Dispensing Guns for two part cartridge systems

	Additional printed catalogue or brochure available
	Obtain more information, samples or literature
	Contact details and how to order

Category:
	Dispensing
	Main Product Index
	Search
	Home

October 2006
Version 2.1