| home > products > adhesives, coatings & sealants > cyanoacrylate adhesives > technical data |    |
Professional Cyanoacrylate Adhesives
Technical Data
 |
 |
Specifications for adhere Cyanoacrylate Adhesives
| Part No | Description | Colour |
Viscosity (cps) |
Gap Fill (mm) |
Fixture Time (sec) |
Full Cure (hours) |
Service (°C) |
Specific Gravity |
| General purpose | ||||||||
| ADH 9420 | Very low viscosity, general purpose cyanoacrylate adhesive | clear |
5 |
0.05 |
5 to 15 |
24 |
-50 to 80 |
1.06 |
| Rapid cure, surface insensitive | ||||||||
| ADH 9406 | Rapid cure, surface insensitive cyanoacrylate adhesive with low viscosity | clear |
20 |
0.10 |
3 to 30 |
24 |
-50 to 80 |
1.06 |
| ADH 9401 | Rapid cure, surface insensitive cyanoacrylate adhesive with medium viscosity | clear |
100 |
0.15 |
3 to 25 |
24 |
-50 to 80 |
1.06 |
| Surface insensitive | ||||||||
| ADH 9416 | High viscosity, surface insensitive cyanoacrylate adhesive | clear |
1500 |
0.20 |
5 to 60 |
24 |
-50 to 80 |
1.08 |
| ADH 9454 | Surface insensitive cyanoacrylate adhesive gel | clear gel |
50-90,000 thixotropic |
0.50 |
3 to 60 |
24 |
-50 to 80 |
1.10 |
| Low odour, low bloom | ||||||||
| ADH 9408 | Low viscosity, low odour, low bloom cyanoacrylate adhesive | clear |
5 |
0.05 |
5 to 60 |
24 |
-50 to 70 |
1.05 |
| ADH 9460 | Medium viscosity, low odour, low bloom cyanoacrylate adhesive | clear |
100 |
0.15 |
10 to 60 |
24 |
-50 to 70 |
1.06 |
| ADH 9403 | High viscosity, low odour, low bloom cyanoacrylate adhesive | clear |
1000 |
0.20 |
20 to 60 |
24 |
-50 to 70 |
1.08 |
| Rubber toughened | ||||||||
| ADH 9105 | High viscosity, black, rubber toughened cyanoacrylate adhesive | black |
3,500-5,000 |
0.20 |
20 to 90 |
24 |
-50 to 105 |
1.10 |
| Activator/accelerator | ||||||||
| ADH 9455 | Cyanoacrylate activator | clear/ amber |
1 |
0.7 |
||||
| Primer | ||||||||
| ADH 9770 | Cyanoacrylate primer | clear |
1 |
0.7 |
||||
Directions for use
Cure speed is very fast, so ensure that the parts are properly aligned before
assembling with adhesive. ADH 9455 Activator may be used if there are any
gaps or porous surfaces. Some plastics or rubbers may have better bonding
performance with the use of ADH 9770 Primer. Ensure parts are clean, dry
and free from oil and grease. If necessary, use a suitable
cleaner prior
to bonding. Cyanoacrylate adhesives can be hand applied direct from the
bottle - a suitable dispensing needle can be added to the bottle nozzle
for more precision. The application of adhere Cyanoacrylate
Adhesives can be automated easily for highly efficient production
line use; consult
INTERTRONICS for a complete line of suitable dispensing
equipment.
Apply the adhesive sparingly to one surface and press parts firmly together
until handling strength is achieved. As a general rule, as little cyanoacrylate
adhesive as possible should be used - over-application will result in
slow cure speed and lower bond strength.
Cure speed
Cure speed is dependent on the substrates to be bonded. Best results come
with close-fitting parts. Larger bondline gaps will give longer cure times.
ADH 9455 Activator can be used to increase cure speed (some loss of optimal
bond strength can result). Low temperature and low humidity will tend to
slow up the curing process.
Chemical resistance
adhere Cyanoacrylate Adhesives have very good chemical resistance to most oils, leaded petrol, alcohols and light duty cleaning solvents. Cyanoacrylates are not resistant to high levels of moisture and humidity over time.
Storage
Store in a cool, dry area out of direct sunlight to achieve 12 months shelf-life. Refrigeration to 5 °C will help give optimal stability.
ADH 9455 Activator
Apply activator to parts to be bonded, allow the solvent to evaporate, and then immediately apply adhesive and assemble. Alternatively, ADH 9455 Activator can be sprayed onto exposed cyanoacrylate adhesive bondlines for immediate cure.
ADH 9770 Primer
Apply primer only to substrates requiring priming (low surface energy plastics, rubbers, etc), allow the solvent to evaporate, and then immediately apply adhesive and assemble. Primer will also increase cure speed.
 |
 |
 |
| 20 gram cyanoacrylate pin cap bottle | 50 gram cyanoacrylate pin cap bottle | 500 gram cyanoacrylate bottle |
 |
 |
 |
| 20 gram tube of cyanoacrylate gel | 20 ml cyanoacrylate primer bottle | 200ml cyanoacrylate activator aerosol |
| Ordering information | ||
| Part number | Description | |
| ADH9420-20G | Very low viscosity, general purpose cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9420-50G | Very low viscosity, general purpose cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9420-500G | Very low viscosity, general purpose cyanoacrylate adhesive | 500 gram bottle |
| ADH9406-20G | Rapid cure, surface insensitive cyanoacrylate adhesive with low viscosity | 20 gram pin cap bottle |
| ADH9406-50G | Rapid cure, surface insensitive cyanoacrylate adhesive with low viscosity | 50 gram pin cap bottle |
| ADH9406-500G | Rapid cure, surface insensitive cyanoacrylate adhesive with low viscosity | 500 gram bottle |
| ADH9401-20G | Rapid cure, surface insensitive cyanoacrylate adhesive with medium viscosity | 20 gram pin cap bottle |
| ADH9401-50G | Rapid cure, surface insensitive cyanoacrylate adhesive with medium viscosity | 50 gram pin cap bottle |
| ADH9401-500G | Rapid cure, surface insensitive cyanoacrylate adhesive with medium viscosity | 500 gram bottle |
| ADH9416-20G | High viscosity, surface insensitive cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9416-50G | High viscosity, surface insensitive cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9416-500G | High viscosity, surface insensitive cyanoacrylate adhesive | 500 gram bottle |
| ADH9454-20G | Surface insensitive cyanoacrylate adhesive gel | 20 gram tube |
| ADH9408-20G | Low viscosity, low odour, low bloom cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9408-50G | Low viscosity, low odour, low bloom cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9408-500G | Low viscosity, low odour, low bloom cyanoacrylate adhesive | 500 gram bottle |
| ADH9460-20G | Medium viscosity, low odour, low bloom cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9460-50G | Medium viscosity, low odour, low bloom cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9460-500G | Medium viscosity, low odour, low bloom cyanoacrylate adhesive | 500 gram bottle |
| ADH9403-20G | High viscosity, low odour, low bloom cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9403-50G | High viscosity, low odour, low bloom cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9403-500G | High viscosity, low odour, low bloom cyanoacrylate adhesive | 500 gram bottle |
| ADH9105-20G | High viscosity, black, rubber toughened cyanoacrylate adhesive | 20 gram pin cap bottle |
| ADH9105-50G | High viscosity, black, rubber toughened cyanoacrylate adhesive | 50 gram pin cap bottle |
| ADH9105-500G | High viscosity, black, rubber toughened cyanoacrylate adhesive | 500 gram bottle |
| ADH9455-200ML | Cyanoacrylate activator | 200ml aerosol can |
| ADH9770-20ML | Cyanoacrylate primer | 20ml bottle with applicator brush cap |
 |
Additional printed catalogue or brochure available |
 |
Obtain more information, samples or literature |
 |
Contact details and purchasing instructions |
| Category: | |
 |
Adhesives, Coatings & Sealants |
|
Main Product Index |
|
Search |
|
Home |
June 2008
Version 1.1
17 Station Field Industrial Estate, Banbury Road
KIDLINGTON, Oxfordshire, OX5 1JD, ENGLAND
Tel: +44 1865 842842 Fax: +44 1865 842172 info@intertronics.co.uk