1 7

About Preci-Tip™ Precision Dispensing Tips

Also available to buy online at  Available at Intertronics.shop

Preci-Tip™ Precision Dispensing Tips or Nozzles are designed for accurate dispensing of dots, beads or in-fills. Their streamline conical fluid path delivers considerably higher fluid flow rates and lower dispense pump back pressures than most standard dispensing tips. This results in improved dispensing accuracy and component life. The thin wall nozzle cores are produced using a deep drawing process, giving particularly low resistance to fluid flow, and exceptional accuracy and robustness compared to plastic dispensing tips or nozzles.

They have an industry standard Luer Lock thread and can be used with common dispensing barrels or valves.

Preci-Tip Precision Dispensing Tips feature walls which are very thin and rigid, resulting in a smaller outer diameter (OD) required for large inner diameter (ID) fluid paths. This can be particularly useful where a small gauge tip is needed, without compromising on fluid dispense rates. The thin walls further enhance the accuracy and definition of dots, lines or special patterns, and dramatically reduce fluid stringing or tailing tendencies.

Preci-Tip Precision Dispensing Tips standard gauge tips are made from phosphor bronze with electroless nickel coating. This provides a hard, abrasion resistant nozzle with low resistance to fluid flow. As an option, Preci-Tips are available with a nickel PTFE coating – an electroless nickel coating with polytetrafluoroethylene particles. This provides a hard, abrasion resistant, inert, lubricious and hydrophobic surface which provides even better release of liquids and oils. Micro-gauge Preci-Tips are made from nickel silver. All Preci-Tips have polypropylene hubs.

high precision dispensing nozzles

Features & Benefits

  • Dispense dots and beads as small as 50 microns
  • High accuracy, repeatable dispensing
  • Reduces dispense pump back pressure, improving performance
  • Tips are clog-resistant and tapered for ease of flow, with good fluid break-off
  • Resist stringing
  • Rigid metal nozzles have a much longer lifespan than single-use plastic dispensing tips
  • Precise exit apertures
  • Industry standard Luer Lock fitting compatible with any of our dispensing valves, pumps, or barrels

Applications

  • Dispensing of adhesives, UV cured adhesives, filled adhesives (thermally or electrically conductive), solder paste
  • Automated dispensing applications with tight tolerances and micro quantities
  • Semiconductor packaging, encapsulation, underfills
  • Applications and processes requiring repeatability and accuracy for validation, such as medical device assembly
  • Placement of viscous, small diameter dots and lines
  • Deposit of high surface tension fluid into wells
  • Silicone gasket applications
  • Dropping of phosphor laden silicone onto LEDs
  • Dispense of grease/thermal grease
  • Cavity fill
  • Paste dispensing

Specifications

Nominal overall length 18mm
Hub temperature tolerance -23ºC to 100ºC

Selector Guide

Preci-tips Microdispensing Nozzles (35copy)

 

 

 

 

Preci-Tip Precision Dispensing Tips – standard gauges
Phosphor bronze with electroless nickel coating
Click here to buy on intertronics.shop
Product Code Gauge Colour ID (inch) ID (mm) OD (inch) OD (mm)
IDMSPREC18-PB-EN 18 Pink 0.041 1.039 0.049 1.240
IDMSPREC19-PB-EN 19 Tan 0.034 0.859 0.042 1.059
IDMSPREC20-PB-EN 20 Green 0.027 0.681 0.035 0.879
IDMSPREC21-PB-EN 21 Light Blue 0.024 0.610 0.032 0.810
IDMSPREC23-PB-EN 23 Purple 0.022 0.564 0.025 0.635
IDMSPREC25-PB-EN 25 White 0.017 0.437 0.020 0.508
IDMSPREC27-PB-EN 27 Red 0.013 0.335 0.016 0.406
IDMSPREC30-PB-EN 30 Black 0.009 0.234 0.012 0.305

 

Preci-tips Microdispensing Nozzles (32)COPY

 

 

 

 

Preci-Tip Precision Dispensing Tips – standard gauges with nickel PTFE coating
Phosphor bronze with nickel PTFE coating
Click here to buy on intertronics.shop
Product Code Gauge Colour ID (inch) ID (mm) OD (inch) OD (mm)
IDMSPREC18-PB-PTFE 18 Pink 0.041 1.039 0.049 1.240
IDMSPREC19-PB-PTFE 19 Tan 0.034 0.859 0.042 1.059
IDMSPREC20-PB-PTFE 20 Green 0.027 0.681 0.035 0.879
IDMSPREC21-PB-PTFE 21 Light Blue 0.024 0.610 0.032 0.810
IDMSPREC23-PB-PTFE 23 Purple 0.022 0.564 0.025 0.635
IDMSPREC25-PB-PTFE 25 White 0.017 0.437 0.020 0.508
IDMSPREC27-PB-PTFE 27 Red 0.013 0.335 0.016 0.406
IDMSPREC30-PB-PTFE 30 Black 0.009 0.234 0.012 0.305

 

Preci-Tip Precision Dispensing Tips – micro gauges
Nickel silver
Click here to buy on intertronics.shop
Product code Size Colour ID (inch) ID (mm) OD (inch) OD (mm)
IDMSPREC-M150-NS 150µm Blue 0.006 0.159 0.010 0.244
IDMSPREC-M100-NS 100µm Orange 0.004 0.108 0.008 0.208
IDMSPREC0-M050-NS 50µm Yellow 0.002 0.057 0.007 0.169

Other Information

25 Top Dispensing Tips 25 Top Dispensing Tips
An invaluable list of do’s and don’ts for liquid, fluid and paste dispensing, to help you achieve optimal adhesive and fluid dispensing processes.

All Downloads

Filename Size Download
Preci-Tips selector guide and tube removal instructions 0.24MB
25 Top Dispensing Tips 3.29MB

Ordering Information

orange_phone01865 842842 orange_email  orders@intertronics.co.uk


  • If you’re in the UK, knowing your postcode would help us get in touch even more quickly. If you’re outside the UK, please indicate your country.
  •  

    Any information that you submit using this form will be processed according to our privacy policy.

  • This field is for validation purposes and should be left unchanged.

  • Last updated: November 2022
  • Version: 1.6

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.