Solder paste conditioning

If you store your solder paste in the fridge, then you need a process for getting it onto the production line and ready to use - which means it must be at room temperature and correctly mixed. The THINKY SR-500 Solder Paste Mixer and Conditioning Machine makes this process quick and foolproof.

• It is quick, with a controlled temperature ramp-up within 10 minutes - this might takes two hours normally


• It mixes the paste to full homogeneity, without excessive heating and without air inclusion


• It avoids the problem of condensation and water absorption by the paste during warming from cold

Poor paste mixing, air bubbles and moisture can all cause solder joint failures like voids and shorts. Let us know if you would like to talk more about the THINKY SR-500.

	The mixing in of air bubbles can be seen, and the solder powder is not dispersed uniformly.
	No air bubbles are seen, and the solder powder is dispersed uniformly.

New Techspray information for 2009

We have started to integrate into our website some new catalogue sheets from sales partner Techspray. There are seven of them, which you can download here:

• Conformal Coatings & Temporary Solder Masks


• Duster & Freeze Sprays


• ESD & Anti-Static Products


• Cutters & Brushes


• Precision Cleaners & Defluxers


• Rework & Desoldering Braid


• Wipes & Swabs

Here's a tip - free catalogue download!

Download the latest 28 page PLATO catalogue.

It details our range of quality tools for electronics assembly and repair, including solder pots suitable for lead-free solders and the industry's most popular lead cutters. And of course, replacement soldering iron tips.