INTERTRONICS PLATO PERMANENTLY STATIC DISSIPATIVE PRODUCTS

home > products > dispensing & dispensing equipment > plato permanently static dissipative products

PLATO Permanently Static Dissipative Products

Protects voltage sensitive devices from static discharge
Meets the requirements of DOD-STD-1686 for containers
Complies with MIL-STD-2000 & J-STD-001C
Physical characteristics comply with MIL-B-81705, Type 2
Made of permanently static dissipative plastic material
Test samples are available at no extra charge to test the compatibility of liquids used

PLATO-STAT PERMANENTLY STATIC DISSIPATIVE PRODUCTS PROVIDE ELECTROSTATIC DISCHARGE PROTECTION

PLATO - STAT PERMANENTLY STATIC DISSIPATIVE PRODUCTS PROVIDE ELECTROSTATIC DISCHARGE PROTECTION

Product index
Part No	Description	Use
PLA SF-01	Flux dispenser, 59ml, .25mm ID capillary, 25mm long	Dispense water base fluxes, low viscosity liquids
PLA SF-02	Flux dispenser, 59ml, .5mm ID capillary, 25mm long	Dispense rosin fluxes, lubricants, cleaners, adhesives
PLA SF-B2HS	Scrub brush for spot cleaning, 59ml. Brush is soft, natural horse hair	Soft to medium stiffness, durable and works well for flux removal and general cleaning
PLA SF-B2HH	Scrub brush for spot cleaning, 59ml. Brush is soft, natural hog bristle	Medium to stiff bristle that works well for removing difficult, sticky, crusty, or viscous materials
PLA SF-4	Solvent Dispenser Sleeve, 118ml	Fits over solvent dispenser
PLA SF-6	Solvent Dispenser Sleeve, 177ml	Fits over solvent dispenser
PLA SF-8	Solvent Dispenser Sleeve, 237ml	Fits over solvent dispenser
PLA SF-401	Bottle and spout, 118ml	Dispense liquids
PLA SF-801	Bottle and spout, 237ml	Dispense liquids
PLA SF-1601	Bottle and spout, 473ml	Dispense liquids
PLA SF-250	Bottle and nozzle, 237ml	Dispense liquids
PLA 170SD	Platoshear Lead Cutters with static dissipative grips	Flush cut leads as large as 18 AWG
PLA 175SD	Platoshear Lead Cutters with static dissipative grips and safety guard to reduce risk of lead fly-off	Flush cut leads as large as 18 AWG

Plato-Stat Permanently Static Dissipative Plastic
Electrical Properties
Surface Resistivity	1 x 107 - 1 x 109 ohm/sq.
Volume Resistivity	1 x 107 - 1 x 109 ohm/cm.
Static Decay - Cond 24 hrs. @ 72¤F, 15% RH
5 KV to 0.5 KV (NFPA 56A)	Less than 0.02 sec.
5 KV to 0.5 KV (FTS 101/4046)	Less than 0.02 sec.
Triboelectric Charge	None
Solvent Resistance
Hexane	1.04 x 10-1 g/m2 hydrocarbon
Acetone	2.34 x 10-1 g/m2 hydrocarbon
IPA (Isopropyl Alcohol)	5.0 x 10-3 g/m2 hydrocarbon
Clean Room Particulate Generation
5.0 micron particles	152 / ft3 air/max
0.5 micron particles	31 / ft3 air/max
Contact Contamination	2 micrograms / 25 cm2 hydrocarbon
Silicones	None
Sulfides	None
Chlorides	None
Metallisation	None
Tertiary Amines	None
Physical Characteristics
Military Specifications	Complies with MIL-B-82705, Type 2
Colour	Grey
Clean Room Criteria	Meets Class 10,000
The above product information was supplied by the manufacturer of the static dissipative plastic. Further information is available upon request.

	Obtain more information, samples or literature
	Contact details and purchasing instructions

Category:
	Dispensing & Dispensing Equipment
	Main Product Index
	Search
	Home

May 2012
Version 1.2

17 Station Field Industrial Estate, Banbury Road
KIDLINGTON, Oxfordshire, OX5 1JD, ENGLAND
t +44 1865 842842 e info@intertronics.co.uk

Statements, technical information and recommendations contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warrantees expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connection therewith.